The Tracing

The Piroska Gulachi Amulet's Trace

Lost-Wax Casting

The following pictures provide evidence of the lost-wax casting trace in Piroska Gulachi Amulet.

The tiny white line inside the 'cave' is the remaining plaster.

The remaining plaster is also left here.

The bubble as the result of imperfect vacuum pressure.

Here is the first gate was placed. You can see the grinding/cutting trace.

The below one, here is the second gate was placed. You can see the grinding/cutting trace. It was cut using iron cutter. This is evidenced by the small brown/orange dots of corrosion trace that only happens in iron. The 'corrosion' of bronze is green.

Only lost-wax casting can make tiny detail like this.

Only lost-wax casting can make fine detail like this. The fingerprint.

We can conclude from the pictures above that Piroska Gulachi Amulet which is rich of unreproduceable details was made by applying lost-wax casting.